

6000W Heavy-Duty Water-Cooled Handheld Laser Welding Machine The 6000W water-cooled handheld laser welding machine is the highest-power model in this handheld series. It is intended for evaluated heavy-duty and thicker-material applications where lower-power systems cannot meet the required penetration or production capacity. The 5-in-1 configuration supports laser welding, light cutting, laser cleaning, weld cleaning and energy storage laser welding when configured with the corresponding welding head, control settings and accessories. Actual process capability depends on the selected configuration and application. Recommended Applications The 6000W model should be considered for demanding, thicker-material work only after sample testing and a complete review of the workpiece, joint, fixtures, safety controls and operating conditions. Heavy equipment and thick metal component fabrication Thicker stainless-steel and carbon-steel assemblies Applications that exceed the verified process range of 3000W or 4000W models Production projects with defined penetration and acceptance criteria Energy Storage Laser Welding Function The fifth function is an energy storage laser welding configuration for suitable battery-cell connectors, busbars and related accessible joints. It complements the standard laser welding, laser cutting, laser cleaning and weld-cleaning modes. The welding head, process settings, wire or filler requirement and accessories must be confirmed for the actual application. Energy storage welding must be evaluated from the copper or aluminum grade, thickness, surface condition, joint geometry, electrical and mechanical acceptance criteria, operator access and required production stability. A handheld system is not a direct substitute for a fixture-based automatic workstation; choose between them after representative sample testing. Materials and Copper Selection This machine can be configured for stainless steel, carbon steel, iron, galvanized sheet, aluminum and copper. Copper does not have one universal thickness-to-power value. Selection must be based on the actual material, thickness, joint design, surface condition, penetration requirement, welding speed and acceptance criteria. 6000W Process and Safety Considerations High power does not automatically produce the correct weld. The complete process must control fit-up, travel speed, heat input, shielding gas, fixtures and operator safety. For thinner products, a lower-power model can be more controllable and economical. ES Laser recommends sample testing before model confirmation.